2. Solved Papers
  3. J & K CET Engineering

J & K CET Engineering J and K - CET Engineering Solved Paper-2004

  • question_answer
    A vessel, whose bottom has round holes with diameter of \[1\text{ }mm\]is filled with water. Assuming that surface tension acts only at holes. Then, the maximum height to which the water can be filled in vessel without leakage is (surface tension of water is \[75\times {{10}^{-3}}\text{ }N/m\]and \[g=10\text{ }m/{{s}^{2}}\])

    A)  \[3\,cm\]        

    B)  \[0.3\,cm\]

    C)  \[3\text{ }mm\]       

    D)  \[~3\text{ }m\]

    Correct Answer: A

    Solution :

    For no leakage, \[h\rho g=\frac{2T}{R}\] \[\Rightarrow \] \[T=\frac{Rh\rho g}{2}\] \[\Rightarrow \] \[h=\frac{2T}{R\rho g}\] Given,  \[T=75\times {{10}^{-3}}N/m,\,\,g=10m/{{s}^{2}},\] \[R=0.5\times {{10}^{-3}}m\] \[h=\frac{2\times 75\times {{10}^{-3}}}{(0.5\times {{10}^{-3}})(1000)10}\] \[\Rightarrow \] \[h=30\times {{10}^{-3}}\times 100cm\] \[=3cm\]


You need to login to perform this action.
You will be redirected in 3 sec spinner