2. Solved Papers
  3. JEE Main & Advanced

JEE Main & Advanced JEE Main Solved Paper-2016

  • question_answer
    A screw gauge with a pitch of 0.5 mm and a circular scale with 50 divisions is used to measure the thickness of a thin sheet of Aluminium. Before starting the measurement , it is found that when the two jaws of the screw gauge are brought in contact, the 45th division coincides with the main scale line and that the zero of the main scale is barely visible. What is the thickness of the sheet if the main scale reading is 0.5 mm and the 25th division coincides with the main scale line ? [JEE Main Solved Paper-2016 ]

    A) 0.50 mm                              

    B) 0.75 mm

    C) 0.80 mm                              

    D)  0.70 mm

    Correct Answer: C

    Solution :

                    Least count\[\text{=}\frac{\text{pitch}}{\text{no}\text{.}\,\text{of}\,\text{division}\,\text{on}\,\text{circular}\,\text{scale}}\]\[\text{=}\frac{0.5mm}{50}\]LC = 0.001 mm ?ve zero errow \[=-5\times LC=-0.005mm\] Measured value = main scale reading + screw gauge reading zero error \[=0.\text{5mm}+\{\text{25}\times 0.00\text{1}(0.0\text{5})\}\text{mm}\] = 0.8 mm


You need to login to perform this action.
You will be redirected in 3 sec spinner